Re: AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly

Hello guys !

I've got 6 Sapphire RX Vega 64 Nitro+ and I would like to knows if someone had test wich parameters is good for this card.

I'm using Claymore V15 for mining Ethereum (ETH) only

I've already test BuriedONE parameter in his video but I've got overclocking errors

Thanks !

Nico

I use the following for ETH on my Nitro 64s - maybe not ultra best, but close enough:

Code:

--RAS 28 --RCDRD 12 --RCDWR 5 --RC 44 --RP 12 --RRDS 3 --RRDL 3 --REF 15600 --RFC 248 --FAW 14

for a couple cards w/ weaker mem chips/controller, i use a slightly less aggressive profile:

Code:

--RAS 32 --RCDRD 14 --RCDWR 6 --RC 44 --RP 12 --REF 15600

Hello pbfarmer !

Thanks for your reply !

What kind of profil do you use in Wattman ?

Nico

I don't use Wattman (or even Windows, honestly,) but basically I lock my core state to p0 (850Mhz) by disabling all states above that, while setting my mem clock to 1107 (p3). Then set your mem p3 voltage to whatever is required for your card - should be somewhere between 800-850mv.

This should get you to ~50MH/s for a Vega64.

hello pbfarmer ...do u meant u r using hive os or some other linux based system.
can u just post a screenshot of your overclock settings.your explanation just went over my head.
please post if u don't mind.