Thank you.

If you would like to build your own, you need...


1. an orange pi prime board

2. 128GB (samsung or 'monkey cards' that I forget the brand on at the moment, are what I have used, but I have also tested sandisk and I assume essentially 'any' will work with our image.)

3. a case if you want one.

4. Some 22x22x10mm heatsinks and some smaller ones depending on how you setup your cooling.

5. our custom kernel and image for 128GB cards - which will be provided at launch when the final image is done.


That's it! Since we have done the work in buiding the custom image for the device, that's really all you need, you image the card, and that's that!