Re: [Guide] Dogie's Comprehensive ASICMiner Cube Setup
including cube config below. i'm pretty sure i have all the info correct
Yeah you don't. Mostly not your fault this time though! You were leased a new IP on the router reboot you did after removing the Forwarding Rules.
What divinesnail01 said below is mostly correctly... with a big caveat since divinesnail01 just arrived in the middle of this.
It looks like you have the cube pointing to .17 for the pool, but your PC is at .2. That's not going to work.
The pool on the cube should be set to the same as the IPV4 address on the PC running the proxy software.
The pool on the cube should be set to the same as the IPV4 address on the PC running the proxy software.
However, his PC running the Stratum Proxy was .0.17 just a few moments ago.
I'd suggest setting up a static IP for GameRig.
You don't want to have to change the cube configuration if/when your router decides to lease GameRig a different internal IP address.
Whatever address you decide on GameRig being, go back and change the Cube configuration Pool Addresses field again to match.