All the new generation miners such as T17,T17e,T17+ and S17,S17+,S17pro require a stable voltage between 200v and 240v, anything below or above will burn the PSU or cause a partial damage to it. You did mention this


There is a good chance that you have burned 2 fans on the PSU, if you have another miner try to replace the two fans that don't spin and see if the miner will power on, if it does not - your PSU is dead.

also there could be some protection-mode in the PSU, if you don't feed it with 200v-240v it won't turn on,and thus the miner won't power on, so make sure you measure the voltage.

If non of the above works, then you will have to buy APW9+_14.5V-21V from Bitmian for 134$ + shipping.