From
Confused.
Hi. I'd recommend you plug-in directly. i.e. Ethernet plug from your computer to the Antminer.
Go back and read the whole set-up thread again. Not trying to be a jackwagon... just trying to help.
You might want to RESET your Antminer(s) by using the small button (labelled S2) on the Antminer blade that has the WiFi attached to it. It's small but you can find it if you look for it.
On the newer v 1.2 boards 12-4-13 it is labeled S2. It resets the ip of the machine to 192.168.1.99
I am confuse with this step :
Start Button >> Control Panel >> Network and Internet (View network status and tasks) >> Change adapter setting (Left side of the screen) >> Local Area Connection (Double Click) >> Internet Protocol Version 4 (TCP/IPv4) then Click on Properties >> Select Use the following IP address:
Please look at near the cooling fan on the AntMiner. Youll find a white sticker with an IP address printed on it. (Example: 192.168.2.125)
Set your computer's IP address to the following:
IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1
For the DNS Setting: Select Obtain DNS server address automatically
So if the sticker on my antminer said 192.168.1.99
So i will adjust my laptop ipaddress to the following :
IP Address: 192.168.1.254
Subnet: 255.255.255.0
Default Gateway: 192.168.1.1
so far am i correct?