Hi Chipless,
I have a dead chain in my Bitmain z11 miner. It sees the chain but it counts 0 asics on it as I studied the kerner log when booting. The other 2 chains are fine. Any tips what to do? I tried reflashing and put back al the connections already. I used your firm version 1.8 on it but i tried the original one also.
Thanks for your great work.
Best regards Arthur
Check you PSU try a different one if that dont work you may have a dead board. The board will detect but if the power circuit is damaged then the chips dont detect. They are 2 different parts of the board. Mine when a psu got weak not dead but weak it would not detect one of the boards.