Hey!
I tried flashing because I thought it would be the best and most stable. But I'll try software today. However, if flashing made the rig unstable, I'm not sure if software will be much better
So the crash takes quite a while actually! Sometimes the rig will run for two days (zero HW errors, less than 3% rejects, running smoothly) and then drop off! I'll go and check on it and all the GPU fans are on, CPU fan is on but the system is not responding so I have to hard reboot it...then it runs again!
Or sometimes the rig drops off but when I go check on it, the OS is still working but cgminer failed because the 2nd PSU died causing three cards to turn off.
I did run a couple rigs before without the splitter using the paperclip method. But I feared that backfeeding is what burned a couple risers after turning one psu on before the other.
The CPU is a socket 1150 3.0Ghz G3220 and I have 8GB 2x4 GSkill ram in each.
Thank you so much for helping!
I tried flashing because I thought it would be the best and most stable. But I'll try software today. However, if flashing made the rig unstable, I'm not sure if software will be much better
So the crash takes quite a while actually! Sometimes the rig will run for two days (zero HW errors, less than 3% rejects, running smoothly) and then drop off! I'll go and check on it and all the GPU fans are on, CPU fan is on but the system is not responding so I have to hard reboot it...then it runs again!
Or sometimes the rig drops off but when I go check on it, the OS is still working but cgminer failed because the 2nd PSU died causing three cards to turn off.
I did run a couple rigs before without the splitter using the paperclip method. But I feared that backfeeding is what burned a couple risers after turning one psu on before the other.
The CPU is a socket 1150 3.0Ghz G3220 and I have 8GB 2x4 GSkill ram in each.
Thank you so much for helping!