im a total newb, anyone has advice or a video on how to open port 9333. I have a Apple Airport Xtreme router, here is some pictures of setting
what do i have to change to make it work
thanks
I do not know mac's very well but I would assume it has more to do with your router - you need to log into the router - I have never used the router in question so I am not able to verify if this is 100% correct but here is a site I found that states it walks thru how to do a port forward with your router
https://portforward.com/apple/airport-extreme/So this morning the miner went to 0 hashrate (but still on) and the node offline.
I restarted everything and the miner is now mining but the node is not coming back up. I get the "node starting" screen but after 20 minutes it goes to the "node offline" screen.
when you restarted everything - did you open a new browser window? if not, try that.
did you start the node via the webpage gui? if so, try this - turn off Apollo at the psu - restart it and then open a new browser window/tab and see if that helps - the node should start itself when you power cycle the miner. I had the problem where I was not aware of this and I was trying to start the node via the web gui and that was wrong.
Yes, when I restarted I do it a the psu level.
I did it a second time even, turned the miner off in the dashboard (node already off). Then when the LED is red flip the switch off and on but same problem. The miner goes on as normal, the node is in the "starting node" screen and then after a while goes to "node off"