Re: [WTS] ATX PSU to 2.5 or 2.1/5.5mm 12V coaxial plug power cables [New Product!!]
@ADutchGamer - you read my mind. 
Here is my modular cable design for ATX powering of gridseed miners.
I have pretty much finalized the design except for the actual lengths needed. I could really use some help on that from anyone who has these units. I need to know approximately how long 5 units are end to end similar to how they would be in a spotswood case and also how far apart the individual plugs on the units are (pitch).
http://s30.postimg.org/g23ojeogh/P1010041.jpg
Hope this helps, PS I will join the queue for a cable. (running 12 miners, Contoller/PI and USB hub)
Here is my modular cable design for ATX powering of gridseed miners.I have pretty much finalized the design except for the actual lengths needed. I could really use some help on that from anyone who has these units. I need to know approximately how long 5 units are end to end similar to how they would be in a spotswood case and also how far apart the individual plugs on the units are (pitch).
http://s30.postimg.org/g23ojeogh/P1010041.jpg
Hope this helps, PS I will join the queue for a cable. (running 12 miners, Contoller/PI and USB hub)