This is from the last 2 pages, SERIOUSLY? wtf does this have anything to do with this pool? This just pollutes the thread. Please make another thread to have your orgy.
Perhaps slightly off topic, but just wanted... [snip]
It has something to do with gpu hw acceleration... [snip]
If your intensity is high you will see a drop doing anything, [snip]
Yes, that's what I use
Or you can use the integrated graphics... [snip]
Intensity is 13 (it's a 280X card, and 13 seems to suit it well)... [snip]
First, go to the bios and set integrated to primary. Then you can plug it... [snip]
that dummy plug works with r290?i mean can i use igpu with r290?
Cool, Thanks for the info, Don't suppose you know if teamviewer hits the gpu at all ? [snip]
Nope, you have to use real monitor cable and a real monitor. Good is most monitors have more than 1 port, use something hdmi and dvi
my monitor has 3ports:1 analog,1 dvi,1 hdmi... [snip]
no, but sometimes when i connect i see the main card drop a few kh, but then creeps back up to its normal rate.
I found out to install properly the amd drivers the igpu needs to be disabled...[snip]
Same here. Not a big deal tho.
If it has a DVI-I connector, you can use the dummy plug... [snip]
or u can use an amd based system , and it loads all its drivers w/o dummyplug...[snip]
you can browse when using BAMT
I forgot to tell that the first resistor is enough. You don't need 3.