Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.1c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
Ursul0
on 21/11/2020, 09:00:14 UTC
same here

179MH become 167MH
try set -daglim 4076, i have 474/574 cards, PM 5.2d, win10 1703, drivers 19.6.2, if -daglim 1 (auto, 4023) hashrate about 167MH/s, if set -daglim 4031-4076 hashrate is normal 180Mh, as before

yeah. not really sure what's up, but all my 4gb polarises (except last devices at 10+) now hashing as they were



so if it wasn't clear, phoenix 5.2d is able to allocate full dag(376) now on windows on 4GB. from what I see it's likely be good for the next epoch as well.
4058MB is the actual allocated size in hwinfo.

Hello, they look good, what overclock do you have on those rx570s, I couldn't get more than 30mh from them
the range depends on the gpus, sapphire are the best for amd.
I have all my gpus with individual ODNT profiles(and/or PPT for vegas) and also custom timings with amdmemtweak. for best core2mem you need to clock core at least 1166 and mem over 2066. because I run 12gpu rigs...remotely.. it's very hard to squeeze out all it may give, need to sacrifice some for the sake of stability. but these GPUs are perfectly capable of doing over 32 with rare exceptions (my average across 100+ was about 31.3 or so. also you can go back and see some numbers in the screens I posted. ohh... and better not run your polarises on anything above 880mv. at or just below 850 is the best