Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
after 6 more hours make update to win10.. (i can't sleep.. here 4:54AM now) 
used AMD Driver 12.4.2 >>> i can see my GPU all work in device manager
patch by 'atikmdag-patcher-1.4.7'
switch to compute mode by 'AMD-Compute-Switcher'
but,...
using Phoenix miner 5.2e and 5.3b still same, hashrate still not change like before..
here is the result:
....
any suggestion to make RX480 back to 30Mhs..?
thanks
Remove the -straps command - it is not supported on Polaris GPUs. Then try mining ETC to see the normal hashrate (you need PhoenixMiner 5.3b) when the DAG actually fits in the VRAM. used AMD Driver 12.4.2 >>> i can see my GPU all work in device manager
patch by 'atikmdag-patcher-1.4.7'
switch to compute mode by 'AMD-Compute-Switcher'
but,...
using Phoenix miner 5.2e and 5.3b still same, hashrate still not change like before..
here is the result:
....
any suggestion to make RX480 back to 30Mhs..?
thanks
You won't be able to mine ETH with full speed on 4 GB cards under Windows any more but it will be more like 20-23 MH/s with the current DAG epoch and will go down a little with each new epoch - you will need to let auto-tine to finish in order to see the final hashrate.
wholaaaaa...
after more than 1 day and half make change to Phoenixminer..
now my miner can run and see my rig hashing..
here is my result:
https://i.postimg.cc/FsTwRvJg/tempsetting.jpg
3x RX480 8Gb average 26,9Mhs
2x R9 390 8Gb average 15Mhs
maybe any other clue to make my setting can be more optimum ?
thanks