Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hi.
Just want to say THANK YOU to the @PhoenixMiner Devs for their work and support here.
I used Claymore before because it gives me the highest possible hashrates but got DAG generation errors the last days on three RX570 8GB.
First setting -eres 1 worked a few days with Claymore, then i had to set -eres 0 a few days later and at least it did not work anymore.
Now switched to PhoenixMiner 5.3b and it works fine after some tuning at the same speed.
89W , 1400rpm , 64°C , 30.5MH/s , cclock 1284 MHz , cvddc 900 mV , mclock 2050 MHz each of the GPUs (installed in a bigtower case, win10, Radeon 20.4.2)
Great work!
bye Claymore & hello Phoenix.
maybe its helpful for someone, my configfile:
Just want to say THANK YOU to the @PhoenixMiner Devs for their work and support here.
I used Claymore before because it gives me the highest possible hashrates but got DAG generation errors the last days on three RX570 8GB.
First setting -eres 1 worked a few days with Claymore, then i had to set -eres 0 a few days later and at least it did not work anymore.
Now switched to PhoenixMiner 5.3b and it works fine after some tuning at the same speed.
89W , 1400rpm , 64°C , 30.5MH/s , cclock 1284 MHz , cvddc 900 mV , mclock 2050 MHz each of the GPUs (installed in a bigtower case, win10, Radeon 20.4.2)
Great work!
bye Claymore & hello Phoenix.
maybe its helpful for someone, my configfile:
Code:
-pool ssl://eu1.ethermine.org:5555
-wal <<walletaddress>>
-worker MININGPC
-hstats 2
-mode 1
-gswin 10
-fanmin 30
-tt 66
-ttli 68
-tstop 70
-tstart 50
-mt 1
-coin eth
-mi 14
-gt 44
-cvddc 900
-rxboost 20
-wal <<walletaddress>>
-worker MININGPC
-hstats 2
-mode 1
-gswin 10
-fanmin 30
-tt 66
-ttli 68
-tstop 70
-tstart 50
-mt 1
-coin eth
-mi 14
-gt 44
-cvddc 900
-rxboost 20
Try to rise memclock a little. With core that high, it should hash a lot more.
I`m getting 30.4 at core 1100 memclock 2050 with Vcore 0,75 (micron) and 0,85 (samsung)