Hi,

I'm really struggling here.

Was using Claymore until this morning, when it died...and used the opportunity to swap over to PhoenixMiner.
Using the same settings hasn't been so simple.
My MH/s on my RX580's have dropped from a stable 32Mh/s@77W to 19Mh/s.

My setup:
2x RX580 + 2x GTX 1070
Windows 10
PhoenixMiner 5.3b
AMD driver 20.4.2 (with compute)
Stock GPU BIOS

I've tried everything to get an increased speed:

Re-install drivers
Using OverDriveNTool to alter AMD Card settings (this is what I used with Claymore)
Using PhoenixMiner to alter AMD Card Settings
read the readme and tried several options (-vmr, -gt etc.) - no improvement
tried autotune
played with the strap, rxboost etc...

I feel it is PhoenixMiner not applying the correct strap. It's probably a bit more complicated as I have the 2 NVIDIA cards there.
The NVIDIA cards are running about 1MH/s slower, but I can live with that for now.

On claymore my settings were:
-epsw x -eres 0 -strap POL8H1,POL8H3,POL8H1,POL8H3,1,1 -rxboost 21 -sintensity 75 -mode 1 -mport 0 -tstop 75 -tt 60 -fanmin 20 -fanmax 85 -wd 1 -r 0 -ftime 5

On PhoenixMiner they are:
-coin etc -straps 1 -vmr 33 -tstop 75 -tt 60 -fanmin 20 -fanmax 85 -wdog 1 -rmode 1 -acm  - Getting 19.5 Mh/s

I also tried this: (setting a '0' for my NVIDIA cards so not to alter their mclock etc.)
-coin etc -straps 1 -nvmem 1 -tstop 75 -tt 60 -fanmin 20 -fanmax 85 -wdog 1 -rmode 1 -acm -cclock 0,1200,1175,0,1200,1175 -mvddc 0,850,850,0,850,850 -mclock 0,2150,2125,0,2150,2125 -cvddc 0,850,850,0,850,850 - Getting 20.2 Mh/s

Does anyone have any ideas? Thank you.