Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings !
I don`t use ./phoenixminer to start miner ... I use only local.conf file
globalminer phoenixminer
stratumproxy enabled
proxywallet 0xf1396cbxxxxxxxxxx
proxypool1 eth.2miners.com:2020
poolpass1 x
And OC strings are good ?
cor xxxx xxxx
mem xxxx xxxx
dpm xxxx xxxx
cor (rig id) oc oc oc oc
with rig id = 6 digit hexidecimal number of rig (get either from rig or from web page monitor)
oc = core you want for 570/580 1150 is a good start
same with mem (rig id) and the oc for each card seperated by space. i would start with say 2100 for 570/580.
Dpm isnt really used but set it to 5 for each card
also vlt (rig id) 851 851 875
for vlt settings above = 0.851v
hope it helps.
Thanks for your answer ! I know about rig ID, etc and how to OC in Ethos... but I dont know how to disable auto-tune . I ask that because Ethos don`t come with Phoenixminer had to be implemented. Miner work fine but I don`t like auto-tune because I have low hashrate ( with auto-tune ) .
GPU1: 32C 89% 100W, GPU2: 46C 89% 92W, GPU3: 32C 89% 95W, GPU4: 33C 89% 95W, GPU5: 50C 89% 103W, GPU6: 46C 89% 94W
GPUs power: 579.0 W
Eth speed: 160.406 MH/s, shares: 1786/0/0, time: 27:43
GPUs: 1: 24.989 MH/s (267) 2: 28.482 MH/s (304) 3: 24.987 MH/s (305) 4: 24.990 MH/s (271) 5: 28.479 MH/s (344) 6: 28.479 MH/s (295)
models: 01 Ellesmere RX 570 113-2E366AU-X5T Micron
03 Ellesmere RX 580 xxx-xxx-xxx SK Hynix
04 Ellesmere RX 570 113-2E366AU-X5T Micron
05 Ellesmere RX 570 113-2E366AU-X5T Micron
06 Ellesmere RX 580 xxx-xxx-xxx SK Hynix
07 Ellesmere RX 580 xxx-xxx-xxx SK Hynix
core: 1168 1257 1168 1168 1257 1257
mem: 1750 2000 1750 1750 2000 2000
voltage: 0.992 1.049 0.968 0.965 1.100 1.068