Hi all I am New in this Forum Very Helpfull Forum Sry for my english it is not Good.
Dear PhoenixMiner Need your Help I have one Ring With 4 Gpu 2 RX 570 4GB & 2 RX 570 8 GB.
2 gpu Rx 570 4 gb before some days have 27-28MHs Now have 19Mhs Already Check
With PhoenixMiner_5.4b , PhoenixMiner_5.2a , PhoenixMiner_5.2b , PhoenixMiner_5.2c , PhoenixMiner_5.2e With AMD driver 20.5.1 All Have Enable Compute Mode
My Line is This Have Something Wrong ?
PhoenixMiner.exe -pool ssl://eth-eu1.nanopool.org:9433 -wal (HIDE) -amd -gt 15 -amd -rmode 2 -clkernel 1,3,3,1 -rxboost 1 -eres 0,2,2,0 -dagrestart 1 -daglim 1 -rvram -1,384,384,-1 -tt 53 -tstop 75
Already Use PhoenixMiner_5.2e With AMD driver 20.5.1
Eth speed: 101.053 MH/s, shares: 1/0/0, time: 0:01
main GPUs: 1: 19.430 MH/s (0) 2: 30.038 MH/s (0) 3: 32.162 MH/s (0) 4: 19.423 MH/s (1)
My Results Have any opinion Please For Fix 2 Cards Again to go to 27-28 Mhs?
Thanks A lot Guys Have A nice to meet you all...
It’s because your 4GB are reaching the dag limit on ETH. Basically you have 2 more days on epoch 381 and when epoch 382 will start they will no longer be able to mine at all. There is another miner that if you search lets you mine for another month or two but I don’t want to mention in this thread since it’s not phoenixminer specific.
I would just however remove those 2 GPUs from the rig and sell them on Craigslist. Then add some money and buy an 8gb version and you will get your 30mhs speed back. Nothing else to do. You can mine etc at half the profit however I don’t think you want to do that.
PhoenixMiner will also work after epoch 381 but with speed decreasing with each DAG epoch - we also support "zombie" mode, we just do not call it this way (you need PhoenixMiner 5.2e or later for it to work). There is no "magic" that will keep 4GB cards working with the same hashrate as simply the DAG is becoming too big. Depending on the hashrate loss, you may be better of mining ETC with the 4GB AMD GPUs.
IMPORTANT! The latest Nvidia drivers for Windows 10 460.79 cause crash when PhoenixMiner starts. The problem is caused by a corrupted DLL file that is installed by the driver. You can see how to fix this problem in
this post (it is an easy and quick fix).
[/quote]
Dear PhoenixMiner already use PhoenixMiner 5.2e with With AMD driver 20.5.1 How enable Zombie mode what must to be change in my line already have daglim -1 and working 4072