It increase my hashrate a bit with 41mh/s and power 150w. I just want to run my miner with less power consumption. I just want to make profit than losing due to high Electricity rate here in my country.
Isn't it too low for 1080ti?
BTW I have pair of 1060 (#1,2) and 1080 (not Ti, card #3), with the following config:
-nvdo 1 -nvKernel 0 -straps 4,4,5 -powlim -25 -cclock +135,+135,+130 -cvddc 0 -mclock +520,+525,+675 -mvddc 0
They give me approx:
1: 23.504 MH/s 2: 22.850 MH/s 3: 35.792 MH/s
with the following consumption reported by phoenix miner:
36C 30% 89W, GPU2: 38C 30% 89W, GPU3: 47C 30% 150W
Calymore miner was giving me about 24+ MH/s on 1060 and 38+ on 1080 (with pill). Is there any better settings I can do with PhoenixMiner?