Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hi everyone, I just switched from Claymore to Phoenix and I was surprised at how easy it was to make the switch. One thing I noticed though is that the speed for mining ethereum is a bit lower than Claymore, and my GPU doesn't seem to be utilized to its fullest potential (even though I'm overclocking my GPU). Usually, with Claymore, I would get around 10 mh/s and my GPU was hitting around 70 celsius. Now, as you can see from the image, it's mining around 8.8-9 mh/s and the temperature is below 60 celsius.
Any ideas what I can do to maximize the mining potential? Much appreciated!
Any ideas what I can do to maximize the mining potential? Much appreciated!
From the screenshot it looks like you are running a RX400/500 series GPU. Getting 10MH/s is not right on either miners. You need to turn on Compute mode in order for it to hash at the correct speed. You can turn Compute mode on in the AMD Control Center settings if you have that installed or by adding -acm to your config. You will need to run the .bat file as Admin if you add -acm to your config.