Re: Claymorify - Keep Claymore's straps, rxboost and other optimalizations working
Man, this is stupidiest fraud try i've ever seen, i'm pushing 33.3Mhs from rx588 without your crappy crap, only by miner and settings 
I have rx580's and i am only getting 21Mhs on windows 10 with compute mode, latest amd drivers, latest windows updates, Phoenixminer 5.4c.
i have tweaked the gpu's in AMD control panel cvddc 853 cclock 1165 mvddc 853 mclock 2080
could you please share your settings.
thanks
Quote
-cclock 1250
-mclock 2250
-cvddc 925
-mvddc 825
-mclock 2250
-cvddc 925
-mvddc 825
==> 33/34MHS with rx580 nitro+ se
bios modded i assume as well...
This is what i am not understanding, i thought that modifying the gpu's like on afterburner or AMD control panel was the same as bios flashing.
I did bios flash my rx580's with ATiflash years ago for claymore mining. now they are flashed back to stock because modifying the gpu's amd control panel was enough for me to achieve 31Mhs on claymore.
Are you telling me i need to use PolarisBiosEditor, flash my bios then put those settings example "-cclock 1250 -mclock 2250 -cvddc 925 -mvddc 825 into the phoenixminer .bat file?
Im an idiot. i have it working now....
Those settings will get you faster like you say 31..to go higher you need to modify the timing straps on the bios...can be done using pbe or similar, can be done dynamically on both windows and linux depending on os and/or amdmemtweaker. They tighten the timings on 1500 and higher straps. There are whole posts (several) on how to do this. Alot of the RX5XX cards have a small switch and allow for dual bios..so one mod one for mining and leave the other position for stock. Makes it fast and easy to switch.. (do power down the rig to flip the switch).