Re: [GUIDE] GridSeed Miner Support/Tuning

Step by Step Raspberry SCRIPTA Installation:

1 - SD Formatter (link) clean up your SD Card. At least a 4GB SD.
2 - Download the SCRIPTA Image (link)
3 - Win 32 Disk Imager (link) and write the scripta image on the SD Card.
4 - Put the SD Card into your Raspberry.
5 - SSH access on port 7722, user: root / psw: scripta
6 - Use WinSCP (link) to move over the latest rasp cgminer for gridseed (https://db.tt/UygLkqwd) or Use PuTTY (link)

Code:

wget https://db.tt/UygLkqwd -O cgminer

7 - Go to the location where you copied over your cgminer and do "chmod 777 cgminer"
8 - Go to the SCRIPTA Web GUI, under Miner hit Miner commands, STOP
9 - Go to the location where you copied over your cgminer and run it from there using these commands:

Code:

./cgminer --scrypt -o -u -p --gridseed-options=baud=115200,freq=850

Stability-Fix:

Code:

sudo nano /boot/cmdline.txt

Add the following code at the end of the first line (on the same line as the other text, DO NOT add new line!)

Code:

slub_debug=FP