Hello all,
I am a newbie for mining ETH. I have 2 AMD cards and use lolMiner 1.18a. One is RX470, another one is RX570.
When I began mining ETH. I found my two cards Hashing rate were 22H/s, 24H/s respectively.
1) What I can do on my cards modding up to 30H/s like other people?
Moreover, I found the temperature around 74C degree even they were at lower hashing rate.
2) Would I need to lower the core voltage in order to get cooler temperature?
Thank you for your helps!
1) 4GB -- normal hashrate 19 - 20 MH/s
8GB -- 29 - 31 MH/s
2) start with 900 mV and then try to go lower (some of my rigs can handle 868 mV, some are at 881 mV)
Thank you catfish78 helps!
I just modded two cards bios successfully!
Now, I faced problem when handling MSI Afterburner!
Because I have two brand name cards, one is MSI, another one is Sapphire.
How can AfterBurner handle two different AMD cards?
I set Sapphire RX570 with lower core voltage and Higher Mhz Memory in Profile 1
and I set MSI RX470 with normal core voltage and not High Mhz Memory in Profile 2
Now, run lolminer, AfterBurner mess up their Profiles and freeze my win10.
Moreover, I realized that it is needed to restart lolminer whenever tweak Mhz or mV.
How can I use AfterBurner handle two different brand name cards' settings?
You can both in Profile 1, and Profile 2 for Gaming... You should choose another skin of the MSI that will help you... With another skin you will be able to see all cards that are in the system. ... You can also use the Adrenaline Driver and modify them there the profile is another option...