Is anybody trying to mine with 6x 3080s and having issues with GPU#1 on 5.4c? After a duration of time GPU#1 just starts going crazy with the hashrate jumping around. When I look in GPU-z it shows vrel and vop being hit by the GPU. Upon closing and opening the software it doesn't seem to fix the issue. Now if I physically remove GPU#1 from the system (shut down and re-boot), and then I fire it up the next GPU that was #2 and has now become #1 now has the same issues. These things were perfectly stable in other rigs with only 1 or 2 3080s in them... Any ideas what the problem may be? These are EVGA 3080s (FTW3 and XC3 Ultras). I have tried different Nvidia drivers 460.89 and 461, but no luck. I just downloaded 5.5b and am trying that now. It has been stable for the first half an hour but we'll see if it just fails like the other one after a few hours.
what are the over clock settings?
try older driver 457 I think
Overclock settings aren't a factor here since the cards are perfectly stable at their overclocks if they aren't in the #1 position. No matter how low I turn the overclocks it is still unstable. So far with 5.5b I have been stable for 10 hours now. I am also considering that maybe the 5.4c was just corrupted when I downloaded it and I just needed a fresh install possibly. Currently stable with 460.89 drivers and 5.5b