Hi Guys.
I am running just one card with a silent 650w PSU supply, i have custom FW though allows me alter Freq/Voltage. I also have the fan speed 100% unchecked but fans are throttling up/down constantly. I have messed around with freq/voltage to no avail.
Will i find the same command line and if so do you delete the whole line? Or do i need to flash a a Bitmain FW, it's a very old standard 13.5Th S9.
Thanks.
You mean one hash bord and not one card, at least this is what we "miners" call them, anyway, what custom firmware are you using? most custom firmware will allow you to set static fan speed, you don't have to go back to the stock firmware if you don't want to, and if you do, make sure you don't upgrade to the latest set of firmware versions that say "signature / secured" or anything like that because it will lock your miner.
Will i find the same command line and if so do you delete the whole line?
It depends on which firmware that is, this isn't some standard coding, every firmware has its own code.
Yes, correct one hashboard.
I'm not sure of the exact FW (i purchased of Ebay), it auto refreshes every 30seconds (approx) and has auto tuning option, it also has a section that shows every chip where you can increase/decrease freq of each.