Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
hi,
i tried to flash my vega 64 nitro with the 56 bios on hiveos.
its going wrong and my card didnt get recognized,
can anyone help me to flash it back?
or with the correct 56 bios, and how to see the card?
thx
i tried to flash my vega 64 nitro with the 56 bios on hiveos.
its going wrong and my card didnt get recognized,
can anyone help me to flash it back?
or with the correct 56 bios, and how to see the card?
thx
i got it.
the vega runs with 54 mh/s at 1100 on core and 1028 on mem with 850 mv on both.
tweak timings cl 20 ras 26 rcdrc 12 rcdwr 12 rc 38 rp 12 rrds 3 rrdl 5 rtp 6 faw 12 cwl 8 wtrs 4 wtrl 9 wr 13 ref 15600 rfc 239
is there better settings with the new trm v8.0?
i run it on windows, with 4 vega 56 power coler at 48 mh and 1 vega 56 phantom on 51mhs (morpheus cooler) mem temp set on 62
i've i try to overclock in hive i got many errors with powerplay table.
What do i wrong?
Is there an hashrate increase of switching to hive? when it runs?
thx
50+ MH/s is already good for Vega 56
I'm in HiveOS and my settings are :
SAMSUNG MEM CHIPS
--ras 26 --rcdrd 13 --rcdwr 12 --rc 38 --rp 12 --rrds 3 --rrdl 5 --rtp 6 --faw 12 -- cwl 8 --wtrs 4 --wtrl 9 --wr 13 --ref 24000 --rfc 239
HYNIX MEM CHIPS
--cl 18 --ras 23 --rcdrd 13 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 17000
Then is find the lowest power consumption to stay in the 50.xx range per card.
This way I can hash at 352 MH/s for 1145W at wall (with Platinium PSU and H110 MB + 4Go DDR4 + G4400 + SSD + 8 case fans)
https://imgur.com/a/ik95H8I
