Re: PhoenixMiner 5.5c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

Can I control memory clock and core clocks from the bat files...? I m using rx580 armor oc edition..

Yes, here is what I use on my RX570 8gb MSI Armor cards using Phoenix Miner
-cclock 1170 -mclock 2170 -cvddc 850 -mvddc 850

Newbie question.

I am using Phoenix Miner and ethermine dot org, with GTX 1660 Super and MSI Afterburn.

After I overclock on MSI Afterburn and clicked 'apply'. Do I have to quit the miner, change the content in .bat file and then reopen the miner program again for it to take effect?

Or does it just mine at Overclocked setting instantly after applying the changes in MSI Afterburner?

The reason I am asking is that my MH/s is still the same as before

Changes on afterburner should take effect immediately after you hit the check button!

But if the hashrate (MH/s) is still the same after applying the changes on MSI Afterburner.

What could be the problem?

It usually takes a full minute or two for the hashrate to be updated on the pool side and then reflected in your local miner numbers.

If you aren't seeing an increase you maybe underclocking or overclocking the card too much.