This thread is for support related discussions of the BITMAIN Antminer S2 hashing device
How to overclock your miner to 400MHz / 205GH/s
The miner will draw 500 - 525Watts after this setting
A) ssh into your miner
B) edit the following file
/etc/config/asic-freq
C) change timeout to 36, freq_value to '0780', 'chip_freq' to 400.
How to overclock your miner to 400MHz / 205GH/s
The miner will draw 500 - 525Watts after this setting
A) ssh into your miner
B) edit the following file
/etc/config/asic-freq
C) change timeout to 36, freq_value to '0780', 'chip_freq' to 400.
Is the 'chip_freq' parameter just for the reported frequency in the miner status GUI?
Yes that is what is seems to do.
freq_value controls the actual frequency.I don't know what this means or how to do it:
"B) edit the following file
/etc/config/asic-freq"
Can someone dumb it down for me please?