Re: PhoenixMiner 5.5c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hi, new "miner" here.
I'm mining on 1x3060Ti (ZOTAC Twin Edge OC) for few days. Card is stable running at 61,5MH/s at PW 65%, CC -502, MC +1300 using MSI AfterBurner. But twice (once on start, once after 3 days of mining) happened to me that "CUDA error in CudaProgram.cu:465 : unknown error (999)" appeared (enclosed picture), miner restart itself but the clock reset to stock which mean lower hashrate with higher W. Any solution for this?
Thanks
I'm mining on 1x3060Ti (ZOTAC Twin Edge OC) for few days. Card is stable running at 61,5MH/s at PW 65%, CC -502, MC +1300 using MSI AfterBurner. But twice (once on start, once after 3 days of mining) happened to me that "CUDA error in CudaProgram.cu:465 : unknown error (999)" appeared (enclosed picture), miner restart itself but the clock reset to stock which mean lower hashrate with higher W. Any solution for this?
Thanks
Im starting to get this 465 as well on both of my machines over and over and over. My cards are older 1080Ti and 1070 and Windows 10 and Phoenix Miner 5.4c.
I swapped the power cord on my 1080Ti the 6pin and 8 pin come from two differet rails now, and put a house fan next to it to help with heat. I also lowered the power to 85% and it has been going ok for the past 12 hours. No error 465 yet.
I wish Phoenix would incorporate ETHEnlargment into the miner. The ETHenlargmentpill is necessary for 1080TI to work at proper rate for its cost and power use. But Phoenix does not include it and Enlargmentpill.exe does not run with BAT file or at Windows start and requires UAC turned off or it bugs and stops the miner after every reboot. Its crazy annoying.