Re: PhoenixMiner 5.5c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hey guys,
After successfully tweaked a RX 480 8gb to do ~29 mh/s @ 85w, I got hands at a RX 5600 Asrock, with with the following settings:
- cclock= 1400 MHz
- cvddc= 930 mV
- mclock= 1800 MHz
- mvddc= 850 mV
Getting 39.143 MH/s and Effective speed @ ethermine ~ 39.73- 45 mh/s, consuming 103w and 200w @ the wall.
And it's stable for about 49 hours straight.
Does someone has a better config? I was playing around on some clocks and vddc but this are the only ones that I found that were stable enough to make through a +24hrs.
FYI, just waiting for some risers to throw the both AMD's and a Gigabyte 1060 on a rig
Hi, what configuration do you have on RX 480 8GB?After successfully tweaked a RX 480 8gb to do ~29 mh/s @ 85w, I got hands at a RX 5600 Asrock, with with the following settings:
- cclock= 1400 MHz
- cvddc= 930 mV
- mclock= 1800 MHz
- mvddc= 850 mV
Getting 39.143 MH/s and Effective speed @ ethermine ~ 39.73- 45 mh/s, consuming 103w and 200w @ the wall.
And it's stable for about 49 hours straight.
Does someone has a better config? I was playing around on some clocks and vddc but this are the only ones that I found that were stable enough to make through a +24hrs.
FYI, just waiting for some risers to throw the both AMD's and a Gigabyte 1060 on a rig
I'm playing safe on the gpu's, so that's my .bat config:
-coin eth -gt 67 -proto 3 -tstop 67 -tstart 55 -mt 1 -log 0 -cclock 1150 -cvddc 950 -mclock 2080 -mvddc 950
That's stable +100 hrs ezy, @samsung memory