Hi.

I'm running BOS+ from SD card on a single S9 13,5 THs version.

I've tried different Autotuning settings and so far it seems to run most efficient (taking into count profability) at 1000 W setting (930-935 W measured at the wall) and then mining ~12,15 THs.

I have the miner in a not yet insulated garage and outside temp is app. 5^oC.

I've noticed that the miner performs differently when rebooted at different temperatures. Usually it performs better at warmer temperatures.

Because of this I'm wondering if it would perform better if i rebooted it and retuned at a higher temperature. However when once tuned at 1000 W the settings are stored and the only way I can get it to retune is to choose another W-setting.

Is there a way to reset the tuning at 1000 W or is the way to go to retune at 999 or 1001 W?

It has now been tuned at 100 W-steps from 800-1600 W and I would not like to reset all autotune settings at once.

Regards.
Steff