ok i didnt think the entire log was needed but here it is maybe it will help you guys out more
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 237964k/237964k available, 24180k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000359] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015436] pid_max: default: 32768 minimum: 301
[ 0.015669] Security Framework initialized
[ 0.015764] Mount-cache hash table entries: 512
[ 0.024600] Initializing cgroup subsys cpuacct
[ 0.024632] Initializing cgroup subsys memory
[ 0.024696] Initializing cgroup subsys blkio
[ 0.024832] CPU: Testing write buffer coherency: ok
[ 0.025409] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025487] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026821] Brought up 1 CPUs
[ 0.026846] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028136] devtmpfs: initialized
[ 0.092551] pinctrl core: initialized pinctrl subsystem
[ 0.092764] rstctl core: initialized rstctl subsystem
[ 0.093261] regulator-dummy: no parameters
[ 0.093829] NET: Registered protocol family 16
[ 0.094531] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104200] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104380] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105476] platform 49000000.edma: alias fck already exists
[ 0.105510] platform 49000000.edma: alias fck already exists
[ 0.105537] platform 49000000.edma: alias fck already exists
[ 0.106682] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106865] OMAP GPIO hardware version 0.1
[ 0.108272] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109588] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110904] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111537] of_get_named_gpio_flags exited with status 52
[ 0.111567] gpio-rctrl rstctl.3: loaded OK
[ 0.116673] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119870] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122058] cpsw.0: No hwaddr in dt. Using c8:fd:19:1f:fb:47 from efuse
[ 0.122090] cpsw.1: No hwaddr in dt. Using c8:fd:19:1f:fb:49 from efuse
[ 0.137632] bio: create slab <bio-0> at 0
[ 0.149757] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.149999] of_get_named_gpio_flags: can't parse gpios property
[ 0.150292] vmmcsd_fixed: 3300 mV
[ 0.153408] SCSI subsystem initialized
[ 0.153858] usbcore: registered new interface driver usbfs
[ 0.153972] usbcore: registered new interface driver hub
[ 0.154303] usbcore: registered new device driver usb
[ 0.156391] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156425] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156620] media: Linux media interface: v0.10
[ 0.156718] Linux video capture interface: v2.00
[ 0.156835] pps_core: LinuxPPS API ver. 1 registered
[ 0.156851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.157571] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158760] Switching to clocksource gp_timer
[ 0.176792] NET: Registered protocol family 2
[ 0.177782] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177871] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.177960] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.178051] TCP: reno registered
[ 0.178079] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178125] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178623] NET: Registered protocol family 1
[ 0.179203] RPC: Registered named UNIX socket transport module.
[ 0.179224] RPC: Registered udp transport module.
[ 0.179237] RPC: Registered tcp transport module.
[ 0.179251] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179640] Trying to unpack rootfs image as initramfs...
[ 2.020508] Freeing initrd memory: 12952K
[ 2.021189] CPU PMU: probing PMU on CPU 0
[ 2.021222] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.021763] omap2_mbox_probe: platform not supported
[ 2.025652] VFS: Disk quotas dquot_6.5.2
[ 2.025888] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.027285] NFS: Registering the id_resolver key type
[ 2.027379] Key type id_resolver registered
[ 2.027397] Key type id_legacy registered
[ 2.027463] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.027898] msgmni has been set to 490
[ 2.030745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.030772] io scheduler noop registered
[ 2.030789] io scheduler deadline registered
[ 2.030847] io scheduler cfq registered (default)
[ 2.034876] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.037327] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.037615] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.698454] console [ttyO0] enabled
[ 2.702999] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.711709] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.720331] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.728937] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.737962] [drm] Initialized drm 1.1.0 20060810
[ 2.756634] brd: module loaded
[ 2.766926] loop: module loaded
[ 2.771115] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.781073] nand_get_flash_type: 2c,da against 2c,da
[ 2.786601] ONFI param page 0 valid
[ 2.790276] ONFI flash detected
[ 2.793596] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 2.805509] omap2-nand: detected x8 NAND flash
[ 2.810174] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.815758] omap2-nand: using custom ecc layout
[ 2.820600] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.826995] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.832686] 0x000000000000-0x000000020000 : "spl"
[ 2.839508] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.846970] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.854380] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.861743] 0x000000080000-0x000000240000 : "u-boot"
[ 2.870018] 0x000000240000-0x000000260000 : "bootenv"
[ 2.876970] 0x000000260000-0x000000280000 : "fdt"
[ 2.883606] 0x000000280000-0x000000780000 : "kernel"
[ 2.894603] 0x000000800000-0x000001c00000 : "root"
[ 2.918120] 0x000001c00000-0x000003000000 : "config"
[ 2.941894] OneNAND driver initializing
[ 2.947609] usbcore: registered new interface driver asix
[ 2.953436] usbcore: registered new interface driver cdc_ether
[ 2.959718] usbcore: registered new interface driver smsc95xx
[ 2.965839] usbcore: registered new interface driver net1080
[ 2.971866] usbcore: registered new interface driver cdc_subset
[ 2.978162] usbcore: registered new interface driver zaurus
[ 2.984167] usbcore: registered new interface driver cdc_ncm
[ 2.990972] usbcore: registered new interface driver cdc_acm
[ 2.996917] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.005325] Initializing USB Mass Storage driver...
[ 3.010803] usbcore: registered new interface driver usb-storage
[ 3.017128] USB Mass Storage support registered.
[ 3.022231] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 3.028954] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 3.034198] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 3.042971] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.042992] musb-hdrc: MHDRC RTL version 2.0
[ 3.043006] musb-hdrc: setup fifo_mode 4
[ 3.043034] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.043180] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 3.048223] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 3.054228] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 3.059479] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 3.068249] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.068269] musb-hdrc: MHDRC RTL version 2.0
[ 3.068284] musb-hdrc: setup fifo_mode 4
[ 3.068305] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.068444] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 3.073488] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 3.078796] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.085182] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.093426] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 3.093530] usb usb1: default language 0x0409
[ 3.093589] usb usb1: udev 1, busnum 1, minor = 0
[ 3.093613] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.100742] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.108314] usb usb1: Product: MUSB HDRC host driver
[ 3.113529] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 3.119197] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.125154] usb usb1: usb_probe_device
[ 3.125181] usb usb1: configuration #1 chosen from 1 choice
[ 3.125246] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.125445] hub 1-0:1.0: usb_probe_interface
[ 3.125466] hub 1-0:1.0: usb_probe_interface - got id
[ 3.125494] hub 1-0:1.0: USB hub found
[ 3.129495] hub 1-0:1.0: 1 port detected
[ 3.133638] hub 1-0:1.0: standalone hub
[ 3.133657] hub 1-0:1.0: individual port power switching
[ 3.133675] hub 1-0:1.0: no over-current protection
[ 3.133693] hub 1-0:1.0: Single TT
[ 3.133714] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.133734] hub 1-0:1.0: power on to power good time: 10ms
[ 3.133790] hub 1-0:1.0: local power source is good
[ 3.133903] hub 1-0:1.0: enabling power on all ports
[ 3.134954] mousedev: PS/2 mouse device common for all mice
[ 3.142894] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.150393] 44e3e000.rtc: already running
[ 3.154886] i2c /dev entries driver
[ 3.159927] pps_ldisc: PPS line discipline registered
[ 3.165406] Driver for 1-wire Dallas network protocol.
[ 3.172721] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.180280] cpuidle: using governor ladder
[ 3.184610] cpuidle: using governor menu
[ 3.189188] of_get_named_gpio_flags exited with status 6
[ 3.189208] of_get_named_gpio_flags: can't parse gpios property
[ 3.189224] of_get_named_gpio_flags: can't parse gpios property
[ 3.189262] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.196484] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.203299] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.210521] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.217853] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.224804] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.235151] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.259065] of_get_named_gpio_flags exited with status -517
[ 3.259132] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.266912] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.273692] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.280886] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.289043] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.295337] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.302514] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.314763] usbcore: registered new interface driver usbhid
[ 3.320683] usbhid: USB HID core driver
[ 3.327585] TCP: cubic registered
[ 3.331107] Initializing XFRM netlink socket
[ 3.335689] NET: Registered protocol family 17
[ 3.340582] NET: Registered protocol family 15
[ 3.345454] Key type dns_resolver registered
[ 3.350088] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.358166] ThumbEE CPU extension supported.
[ 3.362675] Registering SWP/SWPB emulation handler
[ 3.368694] registered taskstats version 1
[ 3.375319] of_get_named_gpio_flags exited with status -517
[ 3.375393] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.432357] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.438767] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.453288] libphy: 4a101000.mdio: probed
[ 3.457601] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.467832]
[ 3.472507] cpsw 4a100000.ethernet: NAPI disabled
[ 3.477894] of_get_named_gpio_flags exited with status -517
[ 3.477960] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.486669] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.495951] cpu0 supply cpu0 not found, using dummy regulator
[ 3.502437] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.508271] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.521063] ALSA device list:
[ 3.524301] No soundcards found.
[ 3.528873] Freeing init memory: 264K
[ 3.532928] Failed to execute /init
[ 4.533755] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.846283] net eth0: initializing cpsw version 1.12 (0)
[ 5.855234] net eth0: phy found : id is : 0x7c0f1
[ 5.862593] libphy: PHY 4a101000.mdio:01 not found
[ 5.867838] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 8.930905] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Mar 29 20:41:06 (none) local0.err cgminer[368]: Miner compile time: Mon Jul 15 15:44:23 CST 2019 type: Antminer L3++
Mar 29 20:41:06 (none) local0.warn cgminer[368]: Started cgminer 4.9.0
Mar 29 20:41:06 (none) local0.notice cgminer[368]: detected at /sys/class/gpio/gpio51/value chain 0
Mar 29 20:41:06 (none) local0.notice cgminer[368]: detected at /sys/class/gpio/gpio48/value chain 1
Mar 29 20:41:06 (none) local0.notice cgminer[368]: detected at /sys/class/gpio/gpio47/value chain 2
Mar 29 20:41:06 (none) local0.notice cgminer[368]: detected at /sys/class/gpio/gpio44/value chain 3
Mar 29 20:41:06 (none) local0.notice cgminer[368]: detect total chain num 4
Mar 29 20:41:06 (none) local0.notice cgminer[368]: i2c init ok
Mar 29 20:41:15 (none) local0.notice cgminer[368]: in tty_init
Mar 29 20:41:15 (none) local0.notice cgminer[368]: tty_init 0
Mar 29 20:41:15 (none) local0.notice cgminer[368]: Start A New Asic Response.Chain Id:[0]
Mar 29 20:41:16 (none) local0.notice cgminer[368]: tty_init 1
Mar 29 20:41:16 (none) local0.notice cgminer[368]: Start A New Asic Response.Chain Id:[1]
Mar 29 20:41:16 (none) local0.notice cgminer[368]: tty_init 2
Mar 29 20:41:16 (none) local0.notice cgminer[368]: Start A New Asic Response.Chain Id:[2]
Mar 29 20:41:16 (none) local0.notice cgminer[368]: tty_init 3
Mar 29 20:41:16 (none) local0.notice cgminer[368]: Start A New Asic Response.Chain Id:[3]
Mar 29 20:41:16 (none) local0.notice cgminer[368]: open device over
Mar 29 20:41:16 (none) local0.notice cgminer[368]: send cmd to get chip address
Mar 29 20:41:18 (none) local0.notice cgminer[368]: Chain 0 ASIC 0 !!!
Mar 29 20:41:18 (none) local0.notice cgminer[368]: Chain 1 ASIC 0 !!!
Mar 29 20:41:18 (none) local0.notice cgminer[368]: Chain 2 ASIC 0 !!!
Mar 29 20:41:18 (none) local0.notice cgminer[368]: Chain 3 ASIC 0 !!!
Mar 29 20:41:18 (none) local0.notice cgminer[368]: Need to recheck asic num !!!
Mar 29 20:41:26 (none) local0.err cgminer[442]: Miner compile time: Mon Jul 15 15:44:23 CST 2019 type: Antminer L3++
Mar 29 20:41:26 (none) local0.warn cgminer[442]: Started cgminer 4.9.0
Mar 29 20:41:26 (none) local0.notice cgminer[442]: detected at /sys/class/gpio/gpio51/value chain 0
Mar 29 20:41:26 (none) local0.notice cgminer[442]: detected at /sys/class/gpio/gpio48/value chain 1
Mar 29 20:41:26 (none) local0.notice cgminer[442]: detected at /sys/class/gpio/gpio47/value chain 2
Mar 29 20:41:26 (none) local0.notice cgminer[442]: detected at /sys/class/gpio/gpio44/value chain 3
Mar 29 20:41:26 (none) local0.notice cgminer[442]: detect total chain num 4
Mar 29 20:41:26 (none) local0.notice cgminer[442]: i2c init ok
Mar 29 20:41:36 (none) local0.notice cgminer[442]: in tty_init
Mar 29 20:41:36 (none) local0.notice cgminer[442]: tty_init 0
Mar 29 20:41:36 (none) local0.notice cgminer[442]: Start A New Asic Response.Chain Id:[0]
Mar 29 20:41:36 (none) local0.notice cgminer[442]: tty_init 1
Mar 29 20:41:36 (none) local0.notice cgminer[442]: Start A New Asic Response.Chain Id:[1]
Mar 29 20:41:36 (none) local0.notice cgminer[442]: tty_init 2
Mar 29 20:41:36 (none) local0.notice cgminer[442]: Start A New Asic Response.Chain Id:[2]
Mar 29 20:41:36 (none) local0.notice cgminer[442]: tty_init 3
Mar 29 20:41:36 (none) local0.notice cgminer[442]: Start A New Asic Response.Chain Id:[3]
Mar 29 20:41:36 (none) local0.notice cgminer[442]: open device over
Mar 29 20:41:37 (none) local0.notice cgminer[442]: send cmd to get chip address
Mar 29 20:41:39 (none) local0.notice cgminer[442]: Chain 0 ASIC 0 !!!
Mar 29 20:41:39 (none) local0.notice cgminer[442]: Chain 1 ASIC 0 !!!
Mar 29 20:41:39 (none) local0.notice cgminer[442]: Chain 2 ASIC 0 !!!
Mar 29 20:41:39 (none) local0.notice cgminer[442]: Chain 3 ASIC 0 !!!
Mar 29 20:41:39 (none) local0.notice cgminer[442]: Need to recheck asic num !!!
Mar 29 20:41:41 (none) local0.notice cgminer[442]: Chain 0 ASIC 0 !!!
Mar 29 20:41:41 (none) local0.notice cgminer[442]: Chain 1 ASIC 0 !!!
Mar 29 20:41:41 (none) local0.notice cgminer[442]: Chain 2 ASIC 0 !!!
Mar 29 20:41:41 (none) local0.notice cgminer[442]: Chain 3 ASIC 0 !!!
Mar 29 20:41:41 (none) local0.notice cgminer[442]: frequency = '450'
Mar 29 20:41:41 (none) local0.notice cgminer[442]: dev.timeout = 39
Mar 29 20:41:41 (none) local0.notice cgminer[442]: opt_bitmain_L3_core_temp : 2
Mar 29 20:41:43 (none) local0.notice cgminer[442]: send cmd to open block
Mar 29 20:41:45 (none) local0.err cgminer[442]: cgminer time error total_secs = 1617050505.868478 last_total_secs = 1.000000
Mar 29 20:41:46 (none) local0.warn cgminer[442]: Pool 1 stratum+tcp://scrypt.eu-west.nicehash.com:3333 alive, testing stability
Mar 29 20:41:46 (none) local0.warn cgminer[442]: Switching to pool 1 stratum+tcp://scrypt.eu-west.nicehash.com:3333
Mar 29 20:41:46 (none) local0.warn cgminer[442]: Pool 0 stratum+tcp://scrypt.eu-north.nicehash.com:3333 alive, testing stability
Mar 29 20:41:46 (none) local0.warn cgminer[442]: Switching to pool 0 stratum+tcp://scrypt.eu-north.nicehash.com:3333
Mar 29 20:41:51 (none) local0.warn cgminer[442]: API running in IP access mode on port 4028 (15)
Mar 29 20:42:00 (none) local0.warn cgminer[442]: Stratum reconnect requested from pool 0 to scrypt.eu-north.nicehash.com:3333