do the gridseeds need alot of babysitting? (running scrypt only at 850Mhz)
expecting my babies next week, YAY!
Sadly yes... unless you buy some reset power devices to cycle them regularly...
I have had mine lock up and require a USB reset (unplug the USB cable) several times in the week since I started with it. Its a firmware thing that needs to be addressed.
my results are different then yours(in one case but not the other) my 4 are running non stop for days on end. the issue may be firmware as you say ,but I have 5 pc's doing mining.
One pc is godlike 4 at 850 with no errors and no controller. it is an asrock z77 itx-e
One is not. the other 3 have not been tested. so the issue is the gridseed and your controller. of course if you are using the controller they gave