Hi ! I have an issue with my FIRST S1 and I am a little bit lost, as I don't understand why it does not work.

The S1 gets its IP through the WiFi router which is located at home, and the S1 is in a cooler place , the garage. => IP 192.168.1.101
The fixed IP of the S1 on the LAN segment with RJ-45 connector is IP 192.168.1.99
La plage IP du routeur est dans le segment 192.168.1.X/24 donc pas de problèmes.

If I connect the cable between the routeur and the S1 (RJ-45), the pings on .99 and .101 are getting a reply, and work perfectly. I can acces to the configuration page on both IPs.

If I disconnect the cable, no way to get a reply from the pings done on .99 or .101 ... And of course, no way to acces the configuration page. The S1 is minng fine (test phase)... BUT I need to use the WiFi and having the option to access its configuration through a navigator.

Thanks for help and suggestions.
Michel