Post
Topic
Board Mining (Altcoins)
Re: Antminer L3+ Issue (Have APW3++ PSU)
by
Knathein
on 20/05/2021, 22:47:31 UTC
okay lets try to help. I assume it was ask by the mods to move to alt coins.

I have  some of them .

the default is set to dhcp and will find an ip.

so lets try to set it to default.

get a simple paper clip and straighten it.

find the reset button.

make sure the gear is turned off.

push the paperclip into the small hole and gently feel that you are pushing the reset button.

so it you feel that you know where the reset button is and that you and gently press it with a paper clip good.

next step is find an ip search program.

angry ip
advanced  ip is what i use.

then time to reset the miner.

plug in one hash board not all three. temporary solves 120 volt issues
plug in the controller
plug in an ethernet cable
fire the mofo up 🆙

count to ten and then put the paper clip in the reset hole
press the button look for blinking lights keep pressing the reset button

 the pattern should alter . once it alters it has reset.

you can than search for it in your ip with advanced ip or angry ip.

when you find it the password should be root the

well root for the name and the password.

Sorry to anyone for posting it to bitcoin not altcoins!

I have tried all that, I have plugged it into 2 hashing boards not all 4 of them, did the reset button (held it for at least 45 seconds) and nothing changed. The ethernet lights are on, but Fault/Normal are off, and then on the back of the controller board there is 2 solid-red lights, but I can't read what those lights say