Post
Topic
Board Mining (Altcoins)
Re: [GUIDE] GridSeed Miner Support/Tuning
by
josg21
on 15/03/2014, 06:42:28 UTC

I'm running 19 miners currently on the Pi and it has not had any stability issues. As you can see in the screenshot below, system load is under 0.1, cgminer processes are mostly sleeping. Some differences from your setup: 1) I'm using scripta and a precompiled cgminer posted by someone initially on litecointalk; 2) I'm running two separate cgminer instances (10 and 9 miners). I would suggest for you to try the precompiled cgminer and see if that performs better. If that doesn't help I would start narrowing the problem by disconnecting half of your miners to see if there is one malfunctioning device that might be causing cgminer to misbehave.

Well it completely stopped so I switched back to Ubuntu server on the Thinkpad for now.

Will try again over the weekend but if it hashes less and produces more errors it's gone. Just communicating my results so far.

This graph shows that it hashes slower and the point where it died (12PM) before I switched back to the Thinkpad.

Looks like a lot of people are reporting freezes with the Pi here:
https://litecointalk.org/index.php?topic=9908.225

I should mention that this second "fix" was already applied before I tried to use cgminer for the first time on Pi:
Code:
sudo apt-get install rpi-update
sudo BRANCH=next rpi-update

Not sure if I will waste too much more time on the Pi...would be nice though. I believe that other are having success so it's almost a challenge...but not quite Tongue

my team runs 96 miners per server Smiley