You should post what chip voltage and frequency setting you are using, as well as the kind of firmware and the numbers of errors per time (i.e. hour or day) you get on the boards.
If the whole board gets XXXXX it can be a sign that your frequency is too high for that board and/or the chip voltage for that board is too low.
If the whole board disappears from the Web GUI it can be a sign that the PIC controller on the hash board needs to be reflashed.
HTH
how do i flash the pc controll of the hash board ?
thanks very much for all your support guys you are super cool
Check this topic for more information:
https://bitcointalk.org/index.php?topic=2383200HTH
thanks... i took a look at it but with no image its very hard for me...
i saw before the blizz program recovery videos but they do not plug any board on it and i heard i should use only bitmain...
i have now flashed with the 2019 firmware with the sd card but if i try to do it true the mac it tells me it cant find the file.
i had a virus changing the pool ip.
how can i know if the firmware was updated ??
in the miner bio i can read the system is from 2019 but i dont know if was like this before .
can be that im using my mac to upload the firmaware eventhou im using parallel and windows 10 with edge explorer ?