Post
Topic
Board Hardware
Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner
by
DumaDoo
on 15/03/2014, 23:01:20 UTC
HI all. I recently received an AntMiner. Everything seems ok from an access standpoint but it won't hash. Poking around seems to indicate that DNS is not resolving. I can't get any name resolution when SSH'd into the box. I've been through the various configuration/troubleshooting guides and researching on the forums. I've tried the recommended NTP settings, DNS settings, hard reset, etc. My network config is as follows:

Router: 192.168.1.1
DNS: 192.168.1.1

Ant Config:

IP: 192.168.1.99
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Broadcast: blank
DNS: 8.8.8.8, 192.168.1.1

Any ideas what other configuration settings I need to review/check?

Thanks

Did you try changing the Ant IP address or switching it to DHCP protocol...

could also mean that your antminer isn't connected to the internet? so check LAN and WAN