for people using raspberry pi's and cgminer... Do you guys get lower hashrate poolside, then what it shows on the cgminer dash? Because with the TPLinks, i get 3500-3700kh/s on 10 units @850 but with cgminer on the Pi, I get 1600-2500 kh/s POOLSIDE, but the cgminer shows the same hashrate as what i am suppose to be getting
It's weird, but I also have 4 plugged into a different pi, same exact config, but it shows proper hash rate pool side and on cgminer.. I'm thinking either the Hubs or something is not fast enough to handle the load, i dont know
Any ideas?
Danny
The hashrate cgminer displays is nothing like your 'actual' hashrate, by far. If you aren't accepting any shares, the hashrate will remain the same. You have to look at the accepted difficulty and time running. Lightningasic dashboard displays hashrate calculated in that manner, or how pools would calculate it.
(thinking maybe a problem with RPi) so i plug in 3 gridseed units with the same config file and i get different results with lesser units on the Pi