for people using raspberry pi's and cgminer... Do you guys get lower hashrate poolside, then what it shows on the cgminer dash? Because with the TPLinks, i get 3500-3700kh/s on 10 units @850 but with cgminer on the Pi, I get 1600-2500 kh/s POOLSIDE, but the cgminer shows the same hashrate as what i am suppose to be getting
It's weird, but I also have 4 plugged into a different pi, same exact config, but it shows proper hash rate pool side and on cgminer.. I'm thinking either the Hubs or something is not fast enough to handle the load, i dont know
Any ideas?
Danny
I can't answer your question but am curious about your configuration. I cannot get my gridseed 5 chip to run either dual or single without it crashing the Pi within 30 minutes. I've tried various compiles and what knot but no luck. I'm also headless so I can't see if there are any console errors. It works perfect in windows but the noise is too much for me to leave running in my room. Any information on your setup would be great. I used to have the Pi connected to two hubs with antminers. Now I just have the Pi connected directly to the Gridseed. Still crashes.