Is there a method for viewing real time hashspeed in windows? right now I'm using CPU miner as depicted in this guide, it is working and my pool is reporting approximately the hashrate I would expect, but it would be great to be able to see real time speed, so I could tweak/troubleshoot the devices when needed. If not in Windows, I could switch over to Xubuntu on my laptop and control the devices from there, if there is a way in linux...

Right now I have 3 devices (more arriving today), they are powered by a Corsair CX500 PSU, all 3 running off one PCIe 6pin plug. I have to say that right now they are pulling way more than the "8 watts" advertised in single mode scrypt... My Kill-aWatt meter is reading 170 watts  at the wall for the 3 pack (psu plugged into meter). Also, I have these running at 800 right now. At 850 I noticed some nonce errors, and a lower hash speed reported by the pool... and oddly enough, at 850 the units were pulling LESS wattage, about 120watts as opposed to 170 @ 800. And finally, thanks to those who put work into this guide, it's been real helpful!