In my log you can saw .
Set to voltage raw 1800, step by step. -> You must measure PSU output voltage 18V +-
Set to voltage raw 2000, step by step. -> You must measure PSU output voltage 20V +-
And here is photo where measure output voltage on PSU
https://ibb.co/B3nM0BVIf you have a multimeter you can measure impedance(Ohm) on Chain0 between Source and Drain and Gate ( MOS transistor)
And give us result.
Here is photo what to do.
https://ibb.co/85hLtRdAnd you can try measure impedance between V_Boost and Input Voltage -> on the Chain 0
https://ibb.co/8shv4wH 1970-01-01 00:01:34:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
1970-01-01 00:01:36:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
1970-01-01 00:01:36:thread.c:762:create_pic_heart_beat_thread: create thread
1970-01-01 00:01:40:power_api.c:322:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
1970-01-01 00:01:58:uart.c:69:set_baud: set UART baud to 115200
1970-01-01 00:02:01:power_api.c:322:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
1970-01-01 00:02:10:driver-btm-api.c:906:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0
1970-01-01 00:02:10:power_api.c:383:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.