Understood on the hardware.
But if I want the power consumption numbers like 3rd party firmware, is there a way to get that on the bitmain default firmware?
thanks
no you need a hard meter.
a s17 has two plugs you can use two hard meters which will each show 1300 watts or so.
a s19 pro has two plugs you can use two hard meters which will each show 1650 watts or so.
if you program an s17 with brains you can set a specific wattage like 2000 and the software will attempt to send exactly 2000 watts to the unit.
bitmain firmware does not do this.