...Let me tell you about another great solution. And if you're willing to spend a bit more and use an NVME M.2 drive, consider a RockPro64 SBC. It's way faster than Raspi4 and it supports the mentioned superfast drives....
Did you find / do you have a nice case that supports that card?
Everything I have seen is either big and expensive or looks like cheap plastic.
I did my own. It's not ready yet because something got in the way in the meantime. But I bought a board of acrylic, took some measures (quite some trial and error, tbh, :p) and cut it, glued it with specific glue for acrylic, used some plastic bolts and threads to place the board on top of them, and I'm now (this is the part that is stalled due to some life issues) trying to program a small chip to control the NVME M.2 drive temperature, conenct the fan to it and then screw the fun as close as possible to the NVME drive chips. It will also use a thermal resistor to read temps and the fan will change rpms accordingly!
The ones I saw (cases) in the official site are too big, metal and expensive, for my taste. And don't even remember if I could mod them to reuse the old fans I had here!