Post
Topic
Board Hardware
Re: GekkoScience 2Pac/Compac BM1384 Stickminer Official Support Thread
by
Davy4260
on 03/10/2021, 19:21:33 UTC
What does your command line say now?


I created  the .sh file  with the command line :

./cgminer -o stratum+tcp://sha256.mining-dutch.nl:9996 -u / -p /--suggest-diff 10 --gekko-newpac-freq 200   

I open it in the LXtherminal   and sgminer start up like this

ersion 4.11.1 - Started: [2021-10-03 21:19:44.088]
--------------------------------------------------------------------------------
 (5s):19.93G (1m):14.65G (5m):4.429G (15m):1.592G (avg):21.40Gh/s
 A:131584  R:0  HW:0  WU:298.9/m
 Connected to sha256.mining-dutch.nl diff 256 with stratum as user /
 Block: a0b29095...  Diff:54.7G  Started: [21:19:42.911]  Best share: 425
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
 0: GSH 10036027: BM1387:02+ 100.00MHz T:100 P:99  (372:188) | 92.2% WU:^94% | 1
9.90G / 21.33Gh/s WU:298.9/m----------------------------------------------------
 [2021-10-03 21:19:42.906] Pool 1 difficulty changed to 256
 [2021-10-03 21:19:42.911] Network diff set to 54.7G
 [2021-10-03 21:19:42.911] Stratum from pool 0 detected new block at height 7075
09
 [2021-10-03 21:19:42.920] Stratum from pool 1 requested work restart
 [2021-10-03 21:19:43.816] 0: GSH 0 - Toggling ASIC nRST to reset
 [2021-10-03 21:19:44.087] 0: GSH 0 - NewPac Bitcoin Miner (10036027)
 [2021-10-03 21:19:44.088] Pool 0 stratum+tcp://sha256.mining-dutch.nl:9996 stab
le for >120 seconds
 [2021-10-03 21:19:44.089] Switching to pool 0 stratum+tcp://sha256.mining-dutch
.nl:9996
 [2021-10-03 21:20:05.519] Accepted f0b383cf Diff 272/256 GSH 0 pool 0
 [2021-10-03 21:20:47.330] Accepted 9a140a68 Diff 425/256 GSH 0 pool 0