Post
Topic
Board Hardware
Re: GekkoScience NewPac / Terminus R606 (BM1387) Official Support Thread
by
Davy4260
on 04/10/2021, 13:15:12 UTC
Hi everyone  i have a problem i cant get my freq on my newpac not  higher  it starts on 100 mhz and stays there  i try differd things

*Install cgminer again
* created a text .sh file in sgminer folder with
 ./cgminer -o stratum+tcp://sha256.mining-dutch.nl:9996 -u  -p  --suggest-diff 10 --gekko-newpac-freq 200 
And start it here

I run it on a raspberry pi 4

cgminer version 4.11.1 - Started: [2021-10-04 15:14:03.609]
--------------------------------------------------------------------------------
 (5s):8.784G (1m):971.8M (5m):199.2M (15m):66.66M (avg):11.70Gh/s
 A:65536  R:0  HW:0  WU:241.7/m
 Connected to sha256.mining-dutch.nl diff 256 with stratum as user
 Block: 12b57583...  Diff:51.8G  Started: [15:14:06.782]  Best share: 215
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
 0: GSH 10036027: BM1387:02+ 100.00MHz T:100 P:60  (287:188) | 56.1% WU:^77% | 1
6.87G / 17.30Gh/s WU:241.7/m----------------------------------------------------
 [2021-10-04 15:14:02.087] Started cgminer 4.11.1
 [2021-10-04 15:14:02.087] Loaded configuration file /home/pi/.cgminer/cgminer.c
onf
 [2021-10-04 15:14:02.087] Probing for an alive pool
 [2021-10-04 15:14:02.305] Pool 0 difficulty changed to 65536
 [2021-10-04 15:14:02.305] Network diff set to 1.49G
 [2021-10-04 15:14:02.367] Accepted untracked stratum share from pool 0
 [2021-10-04 15:14:03.335] 0: GSH 0 - Toggling ASIC nRST to reset
 [2021-10-04 15:14:03.608] 0: GSH 0 - NewPac Bitcoin Miner (10036027)
 [2021-10-04 15:14:06.767] Pool 0 difficulty changed to 256
 [2021-10-04 15:14:06.782] Network diff set to 51.8G
 [2021-10-04 15:14:06.782] Stratum from pool 0 detected new block at height 7076
13

Maybe someone can help me out