Re: [Open]-I.(42/50) Pre-Order-Group Buy for GRIDSEED MINER (Canada)
For the voltage mod, are you just bridging the pads with solder, or are you adding some resistance?
Also, from your last post, am I correct in assuming you are running the PS at 220 for the savings? I don't think mine powered on at 220V
Thanks melmo
Also, from your last post, am I correct in assuming you are running the PS at 220 for the savings? I don't think mine powered on at 220V
Thanks melmo
I tried bridging the pads with solder, but that wasn't happening so I used some very fine wire. Tin the end of the wire with some solder, dip in some flux and solder to the pads, then trim. I found some stranded wire and then used single strands - that's how tiny the pads are.
I'm running the PS at 110V now. The 10 watt saving is nothing compared the other power-guzzlers I have
