Hello guys.

Relatively new miner here.

My setup consists of:

Asrock H110 Pro BTC+
G3930
4gb Ram
240GB SSD
1600W + 1000W EVGA T2 PSUs
12 RTX 3060Ti FE cards
1 RTX 3070 FE card
Windows 10

I moved the 12 cards from my previous x299 platform to the Asrock one just for the sake of the 13th card however I haven’t been able to mine with all 13 GPUs in the same rig. The systems boots and recognises all 13 cards, I can tune all of them using Afterburner, however after having installed few of the cards I start getting “cuda_error_out_of_memory” message both in Trex and Phoenix miner. Therefore I start gradually increasing my virtual memory to the point when I run out of SSD space but it’s just enough for both miners to start successfully and mine for 48hrs+ without any crashes.

However as mentioned earlier I run out of space. Which is way I installed a second 480gb SSD drive but after multiple attempts taking up to 100% of its capacity for virtual memory takes me to the same cuda error message.

Any ideas would be greatly appreciated.

Regards