Hi,
I have 3080 lhr, started with Trex without unlocker, then went with NBminer 39.3 and now I'm using Trex 24.2 which gives me the best results so far.


GPU Model: 3080 Gigabyte OC Vision
ETH Hashrate: between ~69.5mh/s to ~72.5mh/s at ~220W - 45°C/~78°C at 61%rpm
OS / GPU Driver Version: Windows 10 / Driver 470
Mining Software: T-rex 24.2
Config or notes: lock clock:1100mhz / mclock:1250mhz / because of lock clock: no pl nor cclock. lhr tune:71 / lhr mode: off

I was using NBminer:

GPU Model: 3080 Gigabyte OC Vision
ETH Hashrate: between ~67.5mh/s to ~70.5mh/s at ~220W - 48°C/~78°C at 62%rpm
OS / GPU Driver Version: Windows 10 / Driver 470
Mining Software: NBminer 39.3
Config or notes: lock clock:1100mhz / mclock:1250mhz / because of lock clock: no pl nor cclock. lhr tune:70.5

At start I used Trex 21.6 without unlocker:

GPU Model: 3080 Gigabyte OC Vision
ETH Hashrate: ~54.5mh/s at ~180W
OS / GPU Driver Version: Windows 10  / Driver 470 (not sur)
Mining Software: T-rex 21.6
Config or notes: lock clock:1040mhz / mclock:1240mhz (not sur, maybe 1200 or even 1180) / because of lock clock: no pl nor cclock. lhr tune:71 / lhr mode: off