Post
Topic
Board Mining (Altcoins)
Re: Setting up new miner
by
Startled
on 21/10/2021, 08:49:28 UTC
you say there is no signal in your display, I'd make sur your pcie slot of your gpu is powered:  I would connect a x6pcie (from the psu) on the connector named " POWER_CUT1 ", we can see it on the 4th&6th photos  which should be what powers the first pcie gpu slot (where is your gpu)

I would connect your display hdmi to your gpu hdmi connector

the red light seems to be on the (msata) disk ?
maybe you can try to remove and re seat it again, or remove this disk and boot without it to see if you can access & see the bios, and if the disk is faulty just use another one (sata connector, be it ssd, hdd or even usb stick with os on it)

I never had a riserless motherboard but this is what I would try if I were in your case.


power_cut1 connector:
https://ibb.co/L0fLXn8

overall:
https://ibb.co/kgtqFhC



Hi, thanks for taking the time
I tried with just power_out1 in and took out the drive

https://i.imgur.com/yUQeYcC.jpg

I also tried with powerout_cut1 & power_in1

https://i.imgur.com/vaXnzi0.jpg

Still no signal

https://i.imgur.com/O5NTkDc.jpg

Do I 100% have Power_SW in the right place? I've got a feeling it might be that.

TY