[    0.000000] Booting Linux on physical CPU 0x0
…
…

[    1.107842] i2c /dev entries driver
[    1.114720] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.120243] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.126142] Xilinx Zynq CpuIdle Driver started
[    1.130986] sdhci: Secure Digital Host Controller Interface driver
[    1.137119] sdhci: Copyright(c) Pierre Ossman
[    1.141420] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.148230] mmc0: no vqmmc regulator found
[    1.152248] mmc0: no vmmc regulator found
[    1.196113] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.204784] usbcore: registered new interface driver usbhid
[    1.210292] usbhid: USB HID core driver
[    1.215009] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221304] nand: Micron MT29F2G08ABAEAWP
[    1.225273] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231210] Bad block table found at page 131008, version 0x01
[    1.237430] Bad block table found at page 130944, version 0x01
[    1.243481] 3 ofpart partitions found on MTD device pl353-nand
[    1.249266] Creating 3 MTD partitions on "pl353-nand":
[    1.254354] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262401] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.269736] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.280466] TCP: cubic registered
[    1.283698] NET: Registered protocol family 17
[    1.288392] Registering SWP/SWPB emulation handler
[    1.294274] regulator-dummy: disabling
[    1.298605] UBI: attaching mtd1 to ubi0
[    1.825474] UBI: scanning is finished
[    1.837126] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.844182] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.850977] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857654] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.864492] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.870502] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.877613] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.886643] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.895840] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.895845] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.899844] ALSA device list:
[    1.899848]   No soundcards found.
[    1.916182] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.972485] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.978441] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.987543] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.997429] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.002458] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.013994] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.021191] devtmpfs: mounted
[    2.024296] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.863760] random: dd urandom read with 1 bits of entropy available
[    3.246134]
[    3.246134] bcm54xx_config_init
[    4.316146]
[    4.316146] bcm54xx_config_init
[    8.316962] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.323068] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   24.616702] In axi fpga driver!
[   24.619769] request_mem_region OK!
[   24.623159] AXI fpga dev virtual address is 0xdf9fe000
[   24.628291] *base_vir_addr = 0xc51e
[   24.643040] In fpga mem driver!
[   24.646383] request_mem_region OK!
[   24.649884] fpga mem virtual address is 0xe2000000
[   25.456145]
[   25.456145] bcm54xx_config_init
[   26.546138]
[   26.546138] bcm54xx_config_init
[   30.546970] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   30.553078] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fb1000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5daa000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8142c4c97990481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[35] has core num=1
main.c:9113: Chain[5] ASIC[52] has core num=1
main.c:9113: Chain[5] ASIC[56] has core num=1
main.c:9113: Chain[5] ASIC[61] has core num=1
main.c:9113: Chain[5] ASIC[62] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[9] has core num=2
main.c:9113: Chain[6] ASIC[43] has core num=15
main.c:9113: Chain[6] ASIC[52] has core num=3
main.c:9113: Chain[6] ASIC[56] has core num=2
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:22] [63:5] [63:24] [63:35








driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x02 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x08 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=2 : 2
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=880
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x49 0x00 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x01 0x49 0x02 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x05 0x49 0x08 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=2 : 2
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=880
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:22] [63:5] [63:24] [63:35] [63:36] [63:87] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x4a 0x0c 0x4a 0x04 0x4a 0x0e 0x4a 0x01 0x4a 0x01 0x4a 0x06 0x4a 0x0f 0x4a 0x0e 0x4a 0x05 0x4a 0x04 0x4a 0x0e 0x4a 0x0f 0x4a 0x0d 0x4a 0x02 0x4a 0x0a 0x4a 0x07 0x4a 0x05 0x4a 0x0a 0x4a 0x23 0x4a 0x08 0x4a 0x0f 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4b 0x00 0x4b 0x00 0x4b
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=900
driver-btm-c5.c:13178:bitmain_c5_init: Chain[J8] test patten OK temp=-113
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=142 value=860
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=900 [74]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=74
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 28 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 63 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[35] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[52] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[56] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[61] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[9] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[43] has core num=15
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[52] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[56] has core num=2
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[9] has core num=4
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[17] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[26] has core num=1
driver-btm-c5.c:4571:set_frequency: miner total rate=13735GH/s ideal_total_hash_rate = 13500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=23
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=631
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=631

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=643
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=643

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.1V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=-4
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=675
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:656 Asic[61]:656 Asic[62]:656
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=656
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=650


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4263:ProcessFixFreqForChips: totalRate = 13735, fixed_totalRate = 13635
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=23
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=631
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=631

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=643
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=643

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.1V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=-4
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=675
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:656 Asic[61]:656 Asic[62]:656
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=656
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=650

driver-btm-c5.c:5119:set_frequency: max freq = 656
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 13735, fixed_totalRate = 13500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:26 remote:28 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,-2,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=-2 typeID=00
driver-btm-c5.c:6765:calibration_sensor_offset: Warning: Chain[J8] has no temp offset in PIC! will fix it
driver-btm-c5.c:6889:calibration_sensor_offset: Chain[J8] use default temp chip[244]
driver-btm-c5.c:6319:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x98)
driver-btm-c5.c:6331:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9A)
driver-btm-c5.c:6343:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9C)
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:-64 remote:-64 offset:21
driver-btm-c5.c:6894:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=21 typeID=00
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=244 total_tv_end_sys=245
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 45
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 4443.857658, ideal hash rate = 13500
driver-btm-c5.c:10387:check_system_work: hash rate is low...
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=71.6550 Asic[02]=71.9400 Asic[03]=73.1820 Asic[04]=71.1350 Asic[05]=73.5840 Asic[06]=78.0810 Asic[07]=74.2720 Asic[08]=74.6750
Asic[09]=75.7650 Asic[10]=72.6620 Asic[11]=72.8630 Asic[12]=68.7860 Asic[13]=68.8200 Asic[14]=69.6080 Asic[15]=69.4400 Asic[16]=69.7590
Asic[17]=76.3530 Asic[18]=68.6180 Asic[19]=76.6710 Asic[20]=73.0980 Asic[21]=72.6280 Asic[22]=76.9900 Asic[23]=74.9940 Asic[24]=75.8330
Asic[25]=74.9600 Asic[26]=77.2750 Asic[27]=71.0510 Asic[28]=69.0880 Asic[29]=76.5710 Asic[30]=71.0510 Asic[31]=73.8860 Asic[32]=72.5610
Asic[33]=75.1280 Asic[34]=73.9530 Asic[35]=73.9870 Asic[36]=75.4470 Asic[37]=78.6850 Asic[38]=72.5780 Asic[39]=73.3330 Asic[40]=76.4700
Asic[41]=71.3530 Asic[42]=79.7420 Asic[43]=79.0200 Asic[44]=70.4810 Asic[45]=74.5070 Asic[46]=75.9000 Asic[47]=64.0720 Asic[48]=71.0680
Asic[49]=67.6960 Asic[50]=74.8590 Asic[51]=67.1750 Asic[52]=73.3330 Asic[53]=77.6280 Asic[54]=67.3940 Asic[55]=67.8300 Asic[56]=79.0540
Asic[57]=69.7760 Asic[58]=70.3130 Asic[59]=83.8860 Asic[60]=75.6820 Asic[61]=73.7190 Asic[62]=68.3160 Asic[63]=76.7720

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=1.57700 Asic[07]=0.00000 Asic[08]=2.04600
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=301.989 Asic[21]=201.326 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=34.7450 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=23.5380 Asic[31]=24.1420 Asic[32]=22.5650
Asic[33]=23.2690 Asic[34]=0.00000 Asic[35]=805.306 Asic[36]=21.7760 Asic[37]=20.4510 Asic[38]=23.3530 Asic[39]=68.0480 Asic[40]=23.2360
Asic[41]=838.860 Asic[42]=15.4010 Asic[43]=0.00000 Asic[44]=167.772 Asic[45]=5.10000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[20]=301.989000
Asic[21]=201.326000
Asic[35]=805.306000
Asic[41]=838.860000
Asic[44]=167.772000
Done check_asic_reg
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=47
Chain[6] Chip[62] junction temperature=57
Special fix Chain[6] Chip[62] middle Temp = 62
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 47
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=692