Re: PhoenixMiner 5.8c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
I upgraded from old 5.2c miner (due to DAG size) to 5.8c and now miner even doesn't start ... any suggestions?
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
We use 388.71 drivers (also on other working machines).
2021.11.01:11:28:39.771: main Phoenix Miner 5.8c Windows/msvc - Release build
2021.11.01:11:28:39.771: main Cmd line:
2021.11.01:11:28:39.771: main config.txt: -nvidia -nvKernel 3 -mode 1 -gbase 0 -gser 1 -logfile debug.log -tt 62 -tstop 75 -tstart 60 -fanmin 50 -fanmax 100 -cclock +50 -mclock +450 -powlim -20 -straps 1
2021.11.01:11:28:40.307: main CUDA version: 9.0, CUDA runtime: 8.0
2021.11.01:11:28:40.314: main Available GPUs for mining:
2021.11.01:11:28:40.314: main GPU0: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU3: GeForce GTX 1070 (pcie 4), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU4: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU5: GeForce GTX 1070 (pcie 6), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
2021.11.01:11:28:40.314: main GPU6: GeForce GTX 1070 (pcie
, CUDA cap. 6.1, 8 GB VRAM, 15 CUs2021.11.01:11:28:40.314: main GPU7: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
<--- exit without any info
Miner is started with following ENV :
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Regards,
Stannicek
I have the same problem. Solved it by updating to 460.89. Yours are too old.
I ended up with NBMiner + MSI Afterburner (oldschool like 2017
) - no drivers reinstall - hashrate almost the same, but working. The reason behind that is windows not updated since install (Windows 10 Version 1703, 10.0.15063).I have P106 running in Windows 10 Home (21H1) with Nvidia driver version: 432.00 and no issues.
Code:
2021.11.02:21:14:34.527: main Phoenix Miner 5.8b Windows/msvc - Release build
2021.11.02:21:14:34.527: main Cmd line:
2021.11.02:21:14:34.527: main config.txt: -pool ssl://us2.ethermine.org:5555 -wal 0xWalet.workerb -cdm 0 -mode 1 -clgreen 1 -prate 0.11 -gbase 0 -wdog 1 -rmode 2 -log 1 -logfile Log*.log -logdir Logs -tt 65 -fanmin 50 -tstop 88 -tstart 65 -hstats 2 -fanstop 0 -vmt1 25 -vmt2 20 -vmt3 0 -vmr 16 -powlim -30 -cclock +150 -mclock +440
2021.11.02:21:14:34.613: main CUDA version: 10.0, CUDA runtime: 8.0
2021.11.02:21:14:34.800: main No OpenCL platforms found
2021.11.02:21:14:34.800: main Available GPUs for mining:
2021.11.02:21:14:34.800: main GPU0: P106-100 (pcie 1), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs
2021.11.02:21:14:34.802: main NVML library initialized
2021.11.02:21:14:34.820: main Nvidia driver version: 432.00
2021.11.02:21:14:34.822: main NVAPI error in NvapiWrapper.c:320 : -6
2021.11.02:21:14:35.383: main Eth: Loading pools from epools.txt
2021.11.02:21:14:35.394: main Eth: the pool list contains 7 pools (1 from command-line)
2021.11.02:21:14:35.394: main Eth: primary pool: ssl://us2.ethermine.org:5555
2021.11.02:21:14:35.394: main Starting GPU mining
2021.11.02:21:14:35.461: hwmc GPU0: set auto fan: 65C target temp (min fan 50%, max fan 100%)
2021.11.02:21:14:35.464: hwmc GPU0: Set power limit to 70%
2021.11.02:21:14:35.542: hwmc GPU0: set GPU clock delta to 150 MHz
2021.11.02:21:14:35.662: hwmc GPU0: set memory clock delta to 440 MHz
2021.11.02:21:14:35.726: wdog Starting watchdog thread
2021.11.02:21:14:40.972: GPU0 Light cache generated in 3.1 s (23.0 MB/s)
2021.11.02:21:14:41.021: GPU0 GPU0: Allocating DAG (4.54) GB; good for epoch up to #453
2021.11.02:21:14:41.024: GPU0 GPU0: Generating DAG for epoch #451
2021.11.02:21:14:41.187: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:14:42.353: eths Eth: Received:
2021.11.02:21:14:42.699: GPU0 GPU0: DAG 8%
2021.11.02:21:14:58.625: GPU0 GPU0: DAG generated in 17.6 s (263.2 MB/s)
2021.11.02:21:14:58.627: GPU0 GPU0: Using v3 Ethash CUDA kernels (P106-100)
2021.11.02:21:14:59.526: eths Eth: Received:
2021.11.02:21:15:01.676: main Eth speed: 21.747 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:15:03.754: main GPU0: 52C 50% 84W
GPU0: cclock 1797 MHz, cvddc 881 mV, mclock 4449 MHz, Tj 60C, p-state P0, pcap no, 259 kH/J
GPUs power: 83.9 W; cost: 0.22 USD/day; 259 kH/J
2021.11.02:21:15:08.795: hwmc GPU0: set VRAM timings -vmt1 25 -vmt2 20 -vmt3 0
2021.11.02:21:15:08.795: hwmc GPU0: set VRAM refresh rate -vmr 16
2021.11.02:21:15:11.999: main Eth speed: 21.708 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:15:32.265: main GPU0: 53C 50% 83W
GPU0: cclock 1771 MHz, cvddc 875 mV, mclock 4449 MHz, Tj 61C, p-state P0, pcap no, 261 kH/J
GPUs power: 83.1 W; cost: 0.22 USD/day; 261 kH/J
2021.11.02:21:15:32.673: main Eth speed: 21.707 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:16:57.322: main GPU0: 55C 50% 84W
GPU0: cclock 1797 MHz, cvddc 881 mV, mclock 4449 MHz, Tj 63C, p-state P0, pcap power, 258 kH/J
GPUs power: 83.9 W; cost: 0.22 USD/day; 258 kH/J
2021.11.02:21:16:59.995: main Eth speed: 21.663 MH/s, shares: 0/0/0, time: 0:02
2021.11.02:21:17:28.740: GPU0 Eth: GPU0: ETH share found!
2021.11.02:21:17:28.740: eths Eth: Share actual difficulty: 6794 MH
2021.11.02:21:17:28.761: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2021.11.02:21:17:28.761: eths Eth: Share accepted in 21 ms
2021.11.02:21:17:30.823: main Eth speed: 21.655 MH/s, shares: 1/0/0, time: 0:02
2021.11.02:21:17:36.416: main
2021.11.02:21:17:36.416: main *** 0:03 *** 11/2 21:17 **************************************
2021.11.02:21:17:36.416: main Eth: Mining ETH on ssl://us2.ethermine.org:5555 for 0:03
2021.11.02:21:17:36.416: main Eth: Accepted shares 1 (0 stales), rejected shares 0 (0 stales)
2021.11.02:21:17:36.416: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.11.02:21:17:36.416: main Eth: Maximum difficulty of found share: 6794 MH
2021.11.02:21:17:36.416: main Eth: Average speed (5 min): 21.678 MH/s
2021.11.02:21:17:36.416: main Eth: Effective speed: 23.73 MH/s; at pool: 23.73 MH/s
2021.11.02:21:17:36.416: main
2021.11.02:21:14:34.527: main Cmd line:
2021.11.02:21:14:34.527: main config.txt: -pool ssl://us2.ethermine.org:5555 -wal 0xWalet.workerb -cdm 0 -mode 1 -clgreen 1 -prate 0.11 -gbase 0 -wdog 1 -rmode 2 -log 1 -logfile Log*.log -logdir Logs -tt 65 -fanmin 50 -tstop 88 -tstart 65 -hstats 2 -fanstop 0 -vmt1 25 -vmt2 20 -vmt3 0 -vmr 16 -powlim -30 -cclock +150 -mclock +440
2021.11.02:21:14:34.613: main CUDA version: 10.0, CUDA runtime: 8.0
2021.11.02:21:14:34.800: main No OpenCL platforms found
2021.11.02:21:14:34.800: main Available GPUs for mining:
2021.11.02:21:14:34.800: main GPU0: P106-100 (pcie 1), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs
2021.11.02:21:14:34.802: main NVML library initialized
2021.11.02:21:14:34.820: main Nvidia driver version: 432.00
2021.11.02:21:14:34.822: main NVAPI error in NvapiWrapper.c:320 : -6
2021.11.02:21:14:35.383: main Eth: Loading pools from epools.txt
2021.11.02:21:14:35.394: main Eth: the pool list contains 7 pools (1 from command-line)
2021.11.02:21:14:35.394: main Eth: primary pool: ssl://us2.ethermine.org:5555
2021.11.02:21:14:35.394: main Starting GPU mining
2021.11.02:21:14:35.461: hwmc GPU0: set auto fan: 65C target temp (min fan 50%, max fan 100%)
2021.11.02:21:14:35.464: hwmc GPU0: Set power limit to 70%
2021.11.02:21:14:35.542: hwmc GPU0: set GPU clock delta to 150 MHz
2021.11.02:21:14:35.662: hwmc GPU0: set memory clock delta to 440 MHz
2021.11.02:21:14:35.726: wdog Starting watchdog thread
2021.11.02:21:14:40.972: GPU0 Light cache generated in 3.1 s (23.0 MB/s)
2021.11.02:21:14:41.021: GPU0 GPU0: Allocating DAG (4.54) GB; good for epoch up to #453
2021.11.02:21:14:41.024: GPU0 GPU0: Generating DAG for epoch #451
2021.11.02:21:14:41.187: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:14:42.353: eths Eth: Received:
2021.11.02:21:14:42.699: GPU0 GPU0: DAG 8%
2021.11.02:21:14:58.625: GPU0 GPU0: DAG generated in 17.6 s (263.2 MB/s)
2021.11.02:21:14:58.627: GPU0 GPU0: Using v3 Ethash CUDA kernels (P106-100)
2021.11.02:21:14:59.526: eths Eth: Received:
2021.11.02:21:15:01.676: main Eth speed: 21.747 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:15:03.754: main GPU0: 52C 50% 84W
GPU0: cclock 1797 MHz, cvddc 881 mV, mclock 4449 MHz, Tj 60C, p-state P0, pcap no, 259 kH/J
GPUs power: 83.9 W; cost: 0.22 USD/day; 259 kH/J
2021.11.02:21:15:08.795: hwmc GPU0: set VRAM timings -vmt1 25 -vmt2 20 -vmt3 0
2021.11.02:21:15:08.795: hwmc GPU0: set VRAM refresh rate -vmr 16
2021.11.02:21:15:11.999: main Eth speed: 21.708 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:15:32.265: main GPU0: 53C 50% 83W
GPU0: cclock 1771 MHz, cvddc 875 mV, mclock 4449 MHz, Tj 61C, p-state P0, pcap no, 261 kH/J
GPUs power: 83.1 W; cost: 0.22 USD/day; 261 kH/J
2021.11.02:21:15:32.673: main Eth speed: 21.707 MH/s, shares: 0/0/0, time: 0:00
2021.11.02:21:16:57.322: main GPU0: 55C 50% 84W
GPU0: cclock 1797 MHz, cvddc 881 mV, mclock 4449 MHz, Tj 63C, p-state P0, pcap power, 258 kH/J
GPUs power: 83.9 W; cost: 0.22 USD/day; 258 kH/J
2021.11.02:21:16:59.995: main Eth speed: 21.663 MH/s, shares: 0/0/0, time: 0:02
2021.11.02:21:17:28.740: GPU0 Eth: GPU0: ETH share found!
2021.11.02:21:17:28.740: eths Eth: Share actual difficulty: 6794 MH
2021.11.02:21:17:28.761: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2021.11.02:21:17:28.761: eths Eth: Share accepted in 21 ms
2021.11.02:21:17:30.823: main Eth speed: 21.655 MH/s, shares: 1/0/0, time: 0:02
2021.11.02:21:17:36.416: main
2021.11.02:21:17:36.416: main *** 0:03 *** 11/2 21:17 **************************************
2021.11.02:21:17:36.416: main Eth: Mining ETH on ssl://us2.ethermine.org:5555 for 0:03
2021.11.02:21:17:36.416: main Eth: Accepted shares 1 (0 stales), rejected shares 0 (0 stales)
2021.11.02:21:17:36.416: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.11.02:21:17:36.416: main Eth: Maximum difficulty of found share: 6794 MH
2021.11.02:21:17:36.416: main Eth: Average speed (5 min): 21.678 MH/s
2021.11.02:21:17:36.416: main Eth: Effective speed: 23.73 MH/s; at pool: 23.73 MH/s
2021.11.02:21:17:36.416: main
I would suggest starting the miner from Command Prompt window. Sometimes errors that prevent miner from starting do not show up in the log file, but you can see them in this window.